题解 | #根据状态转移图实现时序电路#

`timescale 1ns/1ns

module seq_circuit(
   input                C   ,
   input                clk ,
   input                rst_n,
 
   output   wire        Y   
);

reg [1:0] cstate,nstate;

always@(posedge clk, negedge rst_n) 
    begin
        if(rst_n == 1'b0) cstate <=2'b00;
        else cstate <= nstate;
    end

always@(*)(1444584) 
    begin
        case(cstate)
            2'b00: begin
                if(C == 1'b0) nstate = 2'b00;
                else nstate = 2'b01;
            end
             2'b01: begin
                if(C == 1'b0) nstate = 2'b11;
                else nstate = 2'b01;
            end
             2'b11: begin
                if(C == 1'b0) nstate = 2'b11;
                else nstate = 2'b10;
            end
             2'b10: begin
                if(C == 1'b0) nstate = 2'b00;
                else nstate = 2'b11;
            end
        endcase
        
    end

   
     assign Y =((cstate == 2'b11) | (cstate == 2'b10 && C == 1'b1))?1'b1: 1'b0;
   
endmodule